Roofing Company in Granger, TX

Granger replacements are often metal-to-metal: taking off worn tin or R-panel and installing new standing seam or R-panel over high-temperature underlayment with new flashing. On the older shingle homes in town it means removing old layers, replacing soft decking, and putting on a roof that fits the house.

Shingle roofing in Granger is often replacing a worn roof on an older home in town, with decking repair, proper underlayment, and a Class 4 shingle because there is nothing between Granger and the hail.

Metal is the roof in Granger. We install standing seam on homes, R-panel on shops, barns and sheds, and replace worn exposed-fastener roofs on both. Farm properties along Highway 95 and toward the lake are a regular part of our work.

New construction around Granger is barns, shops, and custom homes on farm and ranch land. We do dry-in and finish in metal or shingle.

Free inspections around Granger often cover more than one building. We walk the house, the shop and the barn, check fasteners, seams, flashing and decking, and give you a photo report with what needs attention on each.

The most common Granger repair is a re-screw: replacing backed-out fasteners and cracked washers across an exposed-fastener metal roof before it starts leaking everywhere at once. Chimney flashing on older homes and wind-lifted ridge caps are the other regulars.

Granger leaks are wind leaks on old shingle roofs and rusted fasteners on old metal. We trace from the attic, replace what let go, and tell you honestly whether the roof has years left.

Storms cross Granger with nothing in the way, and metal shows hail as dents and shingles show it as bruising. We document the damage for your carrier, tarp any active leak, and repair or replace to the approved scope.

Wind damage in Granger is the whole story: shingles gone from exposed slopes, ridge caps lifted, and panels and laps lifted on metal barns and shops. We repair, re-fasten and document it building by building.

Granger emergencies are wind and hail with nothing in the way: ridge caps and panels lifted on metal, shingles gone on the older homes, a barn roof opened up. We secure what is open, stop the water, document it for your carrier, and repair on a written price.

Granger sits on the open prairie and takes hail and wind full force. We document honestly, meet the adjuster, and handle metal roof claims where cosmetic dent exclusions come into play.

Flat and low-slope roofs for shops, offices, retail and warehouses.

• TPO and single-ply membrane installation and replacement
• Flat roof repair: seams, drains, curbs, penetrations and ponding areas
• Metal roof retrofit for commercial and ag buildings
• Modified bitumen and built-up roof repair

Single-ply membrane for flat and low-slope roofs, commercial and residential.

• New TPO installation on flat and low-slope roofs
• TPO replacement, including wet insulation removal
• TPO repair: seams, flashings, drains and punctures
• Low-slope sections on homes: porches, additions and flat roofs

Seams, drains, ponding and flashings on low-slope roofs, homes and small commercial.

• TPO, modified bitumen, EPDM and built-up roof repair
• Seam repair and rewelding
• Drain, scupper and gutter flashing repair
• Ponding area correction

Commercial metal roofing in Granger is ag: grain, equipment and livestock buildings, plus shops in town. We replace fasteners and panels, reseal laps, and install new R-panel roofs.

A written condition report with cores, photos and options, per building.

• Roof walk with photo mapping of every defect
• Core samples for wet insulation, patched afterward
• Drain, scupper and gutter check
• Seam, flashing, curb and parapet condition